Solutions for the global automation standard KNX

it en

KNX DALI GATEWAY BROADCAST – 4 CHANNELS – TUNABLE WHITE DT6, DT8

Code:IC04B01DAL

Code:IC04B01DAL

The IC04B01DAL DALI Gateway is a 4-channel single-master controller for controlling electronic ballasts with a DALI® interface via the KNX® installation bus.
It supports ballasts according to IEC 62386-102 ed1 (DALI1) as well as devices according to IEC 62386-102 ed2 (DALI2).

The device converts switching and dimming commands from the connected KNX system into corresponding DALI telegrams, or status and event information from the DALI bus into KNX telegrams. The IC04B01DAL has four DALI outputs. Up to 32 ECGs can be connected to each output.

The ECGs connected to a channel are controlled simultaneously via broadcast telegrams. The power supply required for the connected ECGs comes directly from the device. Additional DALI power supplies are not required.

The device is available in a 4TE wide DIN rail housing for direct installation in an electrical distribution board. Connection to the bus is via a bus terminal. Power and DALI cables are connected via screw terminals on the device.

The KNX communication interface is included.

 

KEEP IN TOUCH
WITH EELECTRON