Solutions for the global automation standard KNX

DIN 1 OUT 700 W – UNIVERSAL DIMMER – MASTER & SLAVE

Code:DM01D01KNX - DM01D01ACC

DM01D01KNX is a universal dimmer KNX and power dimmer 1-channel acting as a Master Dimmer to which you can connect up to two Slave Modules (cod. DM01D01ACC) with identical characteristics to the Master power dimmer and connected to it by a local two wires bus.
Dimmer DM01D01KNX can be used in one of the following configurations:
– Trailing Edge: The dimmer turns off part of the final part of the waveform of the input voltage resulting in reduced lamp output. This load regulation is used for resistive or capacitive loads (typically halogen lamps with electronic transformer or incandescent lamps)
– Leading Edge: The dimmer turns off part of the initial part of the waveform of the input voltage, resulting in reduced lamp output. This load regulation is used for inductive loads (typically ferromagnetic transformers or toroidal)

The three channels are independent and can therefore operate on different phases of the same three phase systems respecting the limit of 230Vac between phase and neutral.

The product is intended for installation on DIN rail in electrical distribution cabinets.

KEEP IN TOUCH
WITH EELECTRON