Universal DIN Module 12 IN / 12 OUT PLUS

The IO12F01KNX device integrates 12 relay outputs from 16A-230V AC

Technical highlights & Configuration

Core Features

The IO12F01KNX-SD version includes a microSD card reader with which you can save the programming of the device and restore it to an identical device, avoiding field programming or allowing a quick recovery in the event of a failure.

Technical Data

The device IO12F01KNX integrated
– 12 outputs for light/load control
– 12 channels for PWM
valve control– 6 channels for roller shutter / blind
control– 6 channels for 3-way
valve control– 3 2-pipe fan coil actuators / 2 4-pipe
fan coil actuators The device also has 12 inputs that can be connected to buttons, switches, or be configured as outputs to activate individual signal LEDs (see eelectron LEDs code LD00A01ACC / LD00A11ACC) and can be used for on/off commands, dimming, shutters or blinds / scenarios, sequences, stepper commands, etc.
4 inputs (out of the 12 available) can be configured as analogue for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus. It is also possible to enable 3 complete thermostat modules combined with inputs 1, 2 and 7.

Input 2 can be enabled as a thermostat if inputs 3÷6 are not used; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment.

Mounting & Compatibility

You can also combine 2 or 3 relays with logic interlock for controlling 4-pipe / 3-speed fan coils or combine relay groups (up to 6) for special functions with logic interlock.