DM04A02KNX is a 4-channel KNX universal dimmer with automatic load type identification.
Contact our team to get all your questions answered
4-channel KNX universal dimmer with automatic identification of the type of load and with settable parameters to optimize the control of different types of lamps such as LEDs, incandescent and halogen lamps, dimmable compact fluorescent lamps (CFL), low voltage lamps with electronic or ferromagnetic transformer. The 4 channels can be used independently or paired with pairs (1+2 and 3+4) to drive higher power loads; always respect the maximum power values indicated in the table of this instruction sheet and consult the manual to configure the outputs in ETS as combined.
For the determination of the maximum load and in particular the maximum number of lamps that can be connected, the DimmerLoadTester software is available with which it is possible to analyze the peak absorption of a single lamp and calculate the maximum number of lamps that can be connected.
Each output can be used in one of the following configurations:
Trailing Edge [RC]: the load regulation is obtained by intervening in the final part of the input voltage waveform and is used for capacitive or resistive loads (typically halogen lamps with electronic transformer or incandescent lamps)
Leading Edge [L]: the load regulation is obtained by intervening in the initial part of the input voltage waveform and is used for inductive loads (typically ferromagnetic or toroidal transformers
| Code | Image | Type | Color | Channels |
|---|---|---|---|---|
| DM04A02KNX |
|
-
|
-
|
- |