The KNX numeric keypad includes the KNX communication interface that allows it to be programmed but to operate separately and can be supervised by eSuite or Horizone or with the 9025 readers of the same line. The RGB LED bar on the front of the numeric keypad can indicate the successful recognition of the code entered and shows different colors (configurable via ETS) for the signals of statuses or anomalies.
In addition, a buzzer that can be enabled or disabled to be able to give acoustic feedback at the press of a button. The degree of protection is IP54:
– Protection against splashes of water from any direction
– Protection against dust so as not to interfere with the operation of the device
The temperature probe present there and an input on the rear side configurable as digital or analog complete the product: it is in fact possible to connect an additional NTC probe (eelectron code TS01A01ACC or TS01B01ACC – not included) to the rear 2-way connector to obtain a second temperature measurement, i.e. use the input for port status.
KNX interoperability for the management of the managed room/area obtains benefits from the design phase as the device includes a 2-stage thermostat with integrated PI controller for the regulation of hot / cold via valves, 2 and 4-pipe fan coils, etc. and obviously can define welcome scenarios lights, shutters and anything else provided for in automation.
The product can be installed with the black glass cover that shows the numbers from 0 to 9 back-lit and can be installed on a box of 2 modules and compatible with the main standards (Italian, German, English, etc.).
| Code | Image | Type | Color | Channels |
|---|---|---|---|---|
| 9025GKP10L3 |
|
COVER |
BLACK
|
- |
| OUTKC02KNX |
|
HARDWARE |
BLACK
|
- |
| OUTMC01ACC |
|
ACCESSORY
|
BLACK
|
- |
