The 4-channel KNX actuator, IO04F01KNX device integrates 4 x 16A-230V relay outputs
Contact our team to get all your questions answered
The device also has 4 inputs that can be connected to buttons, switches, or be configured as outputs to activate individual signaling LEDs (see eelectron LEDs code LD00A01ACC / LD00A11ACC) and can be used for on/off commands, dimming, shutters or blinds / scenarios, sequences, stepper commands, etc.
4 x 16A-230V AC relay outputs configurable as:
– 4 outputs
for lighting/load control – 4 channels for PWM
valve control – 2 channels for roller shutter / venetian blind
control – 2 channels for 3-way
valve control – 1 2-pipe fan coil actuators
4 inputs (out of the 4 available) can be configured as analogue for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on/off control (e.g. radiators).
It is also possible to enable 4 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.
The IO04F01KNX-SD version includes a microSD card reader with which you can save the programming of the device and restore it to an identical device, avoiding field programming or allowing quick recovery in the event of a failure.
| Code | Image | Type | Color | Channels |
|---|---|---|---|---|
| IO04F01KNX-SD |
|
-
|
-
|
- |
| IO08F01KNX-SD |
|
-
|
-
|
- |
| IO12F01KNX-SD |
|
-
|
-
|
- |
| IO16F01KNX-SD |
|
-
|
-
|
- |