The DM01D01KNX device is a KNX dimmer.
Contact our team to get all your questions answered
The 1-channel power with Master Dimmer function to which it is possible to connect up to two Slave modules (code DM01D01ACC) having the same power characteristics as the master dimmer and connected to it via a local two-wire bus.
The DM01D01KNX device can be used in one of the following configurations:
– Trailing Edge: the load regulation is obtained by intervening in the final part of the input voltage waveform and is used for capacitive or resistive loads (typically halogen lamps with electronic transformer or incandescent lamps)
– Leading Edge: load regulation is obtained by intervening in the initial part of the input voltage waveform and is used for inductive loads (typically ferromagnetic or toroidal transformers)
The 3 channels are independent and can therefore each operate on different phases of three-phase systems as long as the limit of 230Vac between one phase and neutral is respected.
The product is intended for installation on DIN rail in LV electrical distribution panels.
| Code | Image | Type | Color | Channels |
|---|---|---|---|---|
| DM01D01ACC |
|
ACCESSORY
|
-
|
- |
| DM01D01KNX |
|
ACCESSORY
|
-
|
- |