The IO88E01KNX device is equipped with 8 inputs for dry contacts, which can also be configured as outputs for driving LEDs or signal lights, and 8 16A relay outputs for controlling loads.
Contact our team to get all your questions answered
The device is equipped with a KNX communication interface. Like the KNX 8-channel actuator, this device is also equipped with 8 input channels are dedicated to interfacing dry contacts, e.g. for sensors, traditional buttons, etc. they can be configured if necessary, via SW ETS, AS LOW-VOLTAGE OUTPUT CHANNELS for driving LEDs. The inputs have integrated on/off control functions, dimmers, shutters and scenario recall, logic and scenario functions are also implemented on the physical outputs.
The device provides that the 8 exits on board can be configured in different ways:
• Each individual output independently configured for load control (OUT 1÷ 8)
• Each individual output independently configured for ON/OFF or continuous (PWM) control for solenoid valves (OUT 1÷ 8)
• Outputs configured in pairs for the management of roller shutters, blinds, etc. for a total of 4 channels (CH A ÷ D)
• Outputs configured in pairs for the management of servomotors with 3-point control for solenoid valves or ventilation blades for a total of 4 channels (CH A ÷ D)
• Out1 ÷ Out5 outputs configured as Fan Coil control (heating / air conditioning or cooling / 3 speeds)
| Code | Image | Type | Color | Channels |
|---|---|---|---|---|
| IO88E01KNX |
|
-
|
-
|
- |